Stainless Steel Electrode
ER310 type stainless steel wire is used for welding base metal in cast or wrought iron form of similar type stainless steel. The weld deposit calls for low heat during welding and is fully austenitic. This filler metal may also be used for dissimilar welding.
AWS Specification : AWS A5.9/A5.9M:2006
AWS Classification | ER310 |
Welding Current | DCEP |
Typical wire chemistry (As Welded) | ||||||||
C | Cr | Ni | Mo | Mn | Si | P | S | Cu |
0.08 | 25.0-28.0 | 20.0-22.0 | 0.75 | 1.0-2.5 | 0.30-0.65 | 0.03 | 0.03 | 0.75 |
Typical Mechanical Properties (As Welded) | |
Yield Strength, ksi | 60 |
Tensile Strength, ksi | 89 |
Elongation%, min | 34 |
Welding Positions | F,V,OH,H |
Available Diameters MIG with Operating Range in Amps | |
.023" | 35 - 70 |
.030" | 50 - 100 |
.035" | 160 - 210 |
.045" | 180 – 250 |
Available Diameters TIG with Operating Range in Amps | |
.035" | 60 - 90 |
.045" | 80 - 110 |
1/16" | 90 - 130 |
3/32" | 120 - 175 |
1/8" | 150 - 220 |
5/32" | 170 - 350 |
Download Details