Stainless Steel Electrode
ER410NiMo is extensively used to weld cast and wrought material of similar chemical composition. Preheating and inter pass temperature of not less than 300oF is required.
AWS Specification : AWS A5.9/A5.9M:2006
AWS Classification | ER410NiMo |
Welding Current | DCEP |
Typical wire chemistry | ||||||||
C | Cr | Ni | Mo | Mn | Si | P | S | Cu |
0.06 | 11.0 - 12.5 | 4.0 - 5.0 | 0.4 - 0.7 | 0.6 | 0.5 | 0.03 | 0.03 | 0.75 |
Typical Mechanical Properties (As Welded post heat treatment between 1100o and 1150oF for one hour) | |
Yield Strength, ksi | 92 |
Tensile Strength, ksi | 118 |
Elongation%, min | 20 |
Welding Positions | F,V,OH,H |
Available Diameters MIG with Operating Range in Amps | |
.030" | 50 - 100 |
.035" | 160 - 210 |
.045" | 180 - 250 |
Available Diameters TIG with Operating Range in Amps | |
035" | 60 - 90 |
.045" | 80 - 110 |
1/16" | 90 - 130 |
3/32" | 120 - 175 |
1/8" | 150 - 220 |
5/32" | 170 - 350 |