Send Inquiry
|
Hard Facing Electrodes
58FC-G is a metal-cored, economical hardfacing alloy designed to resist abrasion. This gas-shielded wire can be welded out of position. It is typically used to overlay carbon and low alloy steels, manganese steels, and stainless steels. The welded deposit weathers severe abrasion, moderate impact, and metal-to-metal wear. Hardfacing generally does not require any heat treatment. Preheat and post heat according to the base material where necessary.
Typical Applications :
- Dredge parts
- Earth moving equipment
- Farm equipment
- Muller tires
- Extruder worms
- Conveyors
Specification :
| AWS Classification | Hardfacing |
| Welding Current | DCEN |
Typical wire chemistry (As Welded)
| C | Mn | Mo | W | V | Other | Fe |
| 5 | 1 | 2 | 1.2 | 0.5 | 1 | BAL |
| Typical Mechanical Properties (As Welded on 1020 steel) | |
| Hardness on 1 layer, Rc | 52 - 56 |
| Hardness on 2 layers, Rc | 53 - 57 |
| Welding Positions | F,V,OH,H |
| Available Diameters and suggested Operating Range in Amps | |
| .035" | 80 - 120 |
| .045" | 120 - 150 |
| 1/16" | 150 - 190 |
